ITMA 2007

Boxmeer (Netherlands), 24 August 2007

Finishing equipment for everyone

At ITMA Munich 2007, 13 to 20 September, the SETeMa products will been shown at the booth of Aleph (Hall A2, Booth 303/404), as both parties agreed upon the end of July.

SETeMa's focus towards all textile finishing processes around printing applications, has lead to a broad range of finishing equipment. Modularity, highest possible performance and a low energy and water consumption are the key words in the product line formed by pre-coat, fixation, washing, finishing and drying systems.

Products can, even afterwards, be combined in each requested configuration, giving each customer the most flexible solution with a minimal investment.

The Porta-Pad coating unit, for a broad variety of textiles, comes with a vacuum slit system which allows a simple and reproducible way to apply coating and finishing chemicals.

The Porta-Clean washing unit, developed for the flag and banner market, removes coatings and non-fixated dyestuffs with a minimal fresh water consumption of only 1.8-3.4 l/min dependent of the fabric width. The system is developed with a water recycling and counterflow heat exchanger to meet the requirements of minimum wastewater and energy consumption for a cost effective production.

The Portafix Universal steam/air fixation unit is suitable for the fixation of all textile dyestuffs, with temperatures in the range 100 to 180°C and dwell times between 2 and 30 minutes. It is equipped with a build-in steam generator.

A cunning technology guarantees a maximal colour yield with absolute consistency and reproducibility with a low fresh steam consumption. The fixation units can be delivered in 3, 6, 9 and 11 linear meters content and are afterwards upgradeable to 11 meters.

All equipment comes with maintenance-free chains which drive all rolls, thus ensuring a stress-free fabric transport in all units. All SETeMa products are available in 3 substrate widths: 1.85, 2.50 and 3.40 m.

The newly introduced Portafix Universal, in a width of 3.4 meter, and the Porta-Clean, in a width of 2.5 meter, will be shown at the ITMA 2007.

© 2017 SETeMa BV