setemalogo

Drum-Dryer-5

The Drum-Dryer-5 is a modular roll-to-roll drying unit to be combined with our padding and washing units into a complete production line.

The Drum-Dryer-5 unit is developed as a universal contact dryer in various applications. Textile washing and drying are automatically synchronised to a one step process. The functional principle of contact heating can also be used in curing applications of pigment prints as well as heat fixation of disperse dyes onto polyester.

The DD-5 is equipped with electrically heated, thick walled aluminium drums, guaranteeing an even temperature in the full width of the drum and a quick heat transfer to the textile. The fabric in the DD-5 touches the drums one-sided only, so undesirable ironing effects are avoided.

Since electricity might be limited a gas or oil burner is available as an option to replace the electric heating system. A combination of electrical heated drums and others on gas or oil heating can be made.

The maintenance-free chains drive the drums. A fabric bar can be attached to the chains left and right which greatly simplifies the feed-in handling of cloth into the unit.

All modules required for the proper functioning of the Drum-Dryer are integrated in the device. The drying/fixation chamber is equipped with an integrated exhaust to remove hazardous solvents and moisture, which evaporate easily at high temperatures, thereby keeping the working environment clean. A heat recovery system is used to pre-heat the fresh air, thereby saving on energy costs.

With temperatures between 50 and 200°C (150 °C when on burners) and dwell times from 15 seconds till several minutes the DD-5 is suitable for a wide range of drying, curing and fixation applications.

The DD-5 series is available in our standard widths of 1.85, 2.50 and 3.40 meter. The construction is made of 304 stainless steel and teflon coated aluminium drums.

The Drum-Dryer is CE marked.

pdficon2
© 2017 SETeMa BV